Post by KD5LWU on Dec 15, 2005 8:11:24 GMT -5
Hold LOW+D/MR and then press the power on. On the screen you should see "A2" on the readout.
The information is for the Yaesu FT-2800M
The hidden menu allows for adjustment of deviation, 4 output power
levels and a few other things im not sure of. Warning, I take no
responsibility for the accuracy of the information or any damage to a
radio, but it worked for me. I was told further information can be
found in the service manual.
LOW OUTPUT AUDIO?? HERE IS THE FIX
Hold in "LOW" & "D/MR" buttons, power up radio and release.
Push "MHZ" button one second.
Goto selection 35 in menu "D/ASMT"
Push "MHZ" once.
Select MOD W in menu
** NOTE ** There is no visual indicator of deviation, a deviation
meter should be used for proper alignment.
To reduce deviation push "REV" button, to increase push "D/MR"
button. (multiple times if needed)
Key up radio and check.
When deviation is set appropriately push "LOW" button to lock in.
Push "MHZ" button to return to normal operation.
The information is for the Yaesu FT-2800M
The hidden menu allows for adjustment of deviation, 4 output power
levels and a few other things im not sure of. Warning, I take no
responsibility for the accuracy of the information or any damage to a
radio, but it worked for me. I was told further information can be
found in the service manual.
LOW OUTPUT AUDIO?? HERE IS THE FIX
Hold in "LOW" & "D/MR" buttons, power up radio and release.
Push "MHZ" button one second.
Goto selection 35 in menu "D/ASMT"
Push "MHZ" once.
Select MOD W in menu
** NOTE ** There is no visual indicator of deviation, a deviation
meter should be used for proper alignment.
To reduce deviation push "REV" button, to increase push "D/MR"
button. (multiple times if needed)
Key up radio and check.
When deviation is set appropriately push "LOW" button to lock in.
Push "MHZ" button to return to normal operation.